Walther Ppk Serial Number Date

Walther PP & PPK - Modern Firearms. Experimental Walther 'Police model' pistol which served as a prototype for PP; note that it has Its unique magazine has a prototype metal extension at base. The front gripstrap is stamped '1', and the serial number 750007 is engraved in slide holdopen latch well.
  1. Walther Ppk 7.65 Serial Numbers
  2. Walther Ppk S Serial Number

The most common variant is the Walther PPK, a smaller version of the PP with a shorter grip, barrel and frame, and reduced magazine capacity.A new, two-piece wrap-around grip panel construction was used to conceal the exposed back strap. The smaller size made it more concealable than the original PP and hence better suited to plainclothes or undercover work.

  1. I don't know how to track the serial number to a manufacture date. Inch wide and weighing only 21 ounces, the Walther PPK is a relatively easy weapon The Walther's serial number had been filed off, and the detectives knew that To this date, Bonny Lee Bakley's autopsy report has not been released. 8/10/16 - This is a Walther PP from World War II.
  2. My Grandfather gave my Father tonight a Walther PPK serial number 217167. There is no suffix to the serial number. What I am reading is the serial numbers started in the 750000.
  3. Post-war P38 serial number versus date production chart This information is taken only from original, serial number matching pistols. Serial Number Caliber Slide Legend Date Date Location Commercial (E/N)? 001xxx 9x19mm P38 5/57 Slide No 016xxxE 9x19mm P38 62 Frame Yes 165xxx 9x19mm P38 2/ 62 Slide No.
  4. From 1978 to 1999, USA Walther PPK/S were manufactured by Ranger Manufacturing in Gadsden Alabama and distributed by Interarms. S prefix serial number, indicates an Interarms, 'Under License of', 'Made in USA' (Ranger Mfg) Stainless PPK/s in.380 edited to update serial numbers.
Jul 02, 2018 · This all changed in 1929 when Walther brought out the Model PP. Though a blowback like most of its predecessors and constructed of a slide that surrounded a fixed barrel in much the same manner as the earlier Model 8, it possessed a wonderful DA that allowed the pistol to be carried with the chamber loaded and the hammer all the way forward.
In 97% very crisp condition, we have a Very Rare Variation 5 End of War Production Walther ac Code Waffenamted PP Pistol. Many of these pistols were assembled mis-matched at the factory probably by for G.I.’s immediately after the factory was occupied but this one is matching and was assembled and issued before the war ended.
Hammer Spring Pak - Reduced power - This pak contains 1 each of 16, 17, 18 and 19 pound reduced power hammer springs described above, allowing adjustment of the firearm to individual requirements. Springs function in Walther models PP, PPK, PPKS and P-38, 7.65mm and 9mm(.380) calibers.
The Vz. 50 (also known as the CZ 50) is a Czech made semi-automatic pistol. Vz is an abbreviation of the Czechoslovakian term 'vzor' meaning model. 1 History 1.1 Design 1.2 Manufacture 2 Markings 2.1 Serial numbers 2.2 Date stamp 2.3 Government property stamp 3 Variants After the Second World War, Czechoslovakia's Ministry of the Interior requested a new pistol design from Česká zbrojovka ...
Walther PP and PPK by Manurhin 1956 Manual ... Serial Numbers; All 6000+ Old Gun Catalog Reprints; All 1000+ Old Gun Manual Reprints Authored Books ...
The Walther PP (Polizei Pistole) uses up a significant place in weapons background as the first commercially productive double-action semiauto pistol. It operates on a direct blowback program and a doublesingle motion with a double-action trigger draw for the initial chance and a Iighter single-action pull for follow-up pictures.

Walther Ppk 7.65 Serial Numbers

Arrange the following types of electromagnetic radiation in order of increasing wavelength
sku#024 turkish kirikkale turek fb. cap.9mm (walther pp .380 clone) #862, 1947 dated, t.c. ordusu subaylarina mahsus marked, bottom mag release, finger extension mag, exc. grips, vg bore, rare walther copy, 97-98%
its a Walther PP in 7.65 (.32?) There are very few markings on it ,a few stamps of acceptance and the matching serial numbers. The usual Walther' scroll and model designation are not on the slide - nor does it appear to have been re-blued, I read that this was a wartime procedure to speed up manufacture, but I dont know.
Walther uses the Tenifer finish similar to Glock pistols. After that, the slide is laser-engraved with serial numbers and proof markings before going to final assembly and testing. At the assembly stations, each technician’s table has a 5-step process for assembling the slide and frame components.

BurnRights allows you to modify the access rights for the CD/DVD/BD devices BurnRights is a lightweight and portable app that lets you modify users' access.

  1. Walther PP 32 Serial # and/or date code Discussion in 'Curio & Relic Zone' started by YamahaWR200. I have a Walther PP 32acp made in France. The Mahurin factory as you probably already know. Anyway I cannot find any date codes or anything on the gun. The serial number parallel to the grip on the right hand side is 15950 I believe.
  2. The approximate range of serial numbers for Walther PP's produced during the war(1939-1945) are 155501P to 3906xxP. Your serial number with the ac (Walther mfg code) falls in the late war, 1945 production period.
  3. If you have any trouble locating the serial number for any reason, you can bring the gun into your local gun shop for help. Pick up a copy of either E.J. Hoffschmidt's 'Know Your Walther PP & PPK' or Gene Gangarosa's 'The Walther Handgun Story: A Collector's and Shooter's Guide.' Either one of these books will contain an index of serial numbers for Walther guns.
Walther ppk 7.65 serial numbers

Some PP's have a second serial number on the right side of the slide, forward of the ejection port. Additionally some pistols were shipped with two magazines serial numbered to the gun. Walther factory markings were generally found on the left side of the slide.

Walther Serial Number Lookup

Walther Ppk S Serial Number

Ser# 285,xxx on a Walther PPK (ZellaMellis) should have a 'K' suffix to the number on the frame. The matching ser# marked on the right side of the slide was generally with-out the suffix.
Serial numbering for the PP pistol started at #75,000 (1929)
PPK production started shortly after that (maybe late 31 or '32) and used the same serial number range as the PP model.
When ser#'s reached 1,000,000 for each Model,the numbers were started over again at the 100,000,plus the addition of a 'P' suffix on the PP and a 'K' suffix on the PPK.
(A few thousand run of PPk's were ser#'d with so called 7 digit numbers (million series),no suffix letter. There's always an exception isn't there.
I don't have a ser# chart handy,it's some where in the stack. But I'd agree that with the ser# (assuming it does or SHOULD have the 'K' suffix ,1940 or 41 would be a good guess.
The high polish blue and fine fit and overall finish was still in order at that time. It wasn't long after that shortcuts started to show but they were gradual at first.
Commercial proofs would be in order. At about that time the German Gov't proof mark was being changed to the Eagle/N for nitro proof.
4/1/40 was the date that the old German Crown/N nitroproof mark was elliminated and replaced with the Eagle/N.
That can help date the pistol to either side of that date. But realize that changes didn't happen overnight, on time or in any
perfect order.
Another mark to look for if not a German Military issue weapon (no WaffenAmpt),would be possible German Police Issue.
A tiny Eagle/L or Eagle/C marking is all there was. Sometimes on the frame on the left side right under the mag release,or in that area.
May also be on the slide, on the right side usually.
Any of the proof, Military issue or (Nazi) Police markings would be marked/stamped thru the original finish,not before it was blued.
Check the magazine to see if it is perhaps #'d to the pistol.
On the finger extension, the serial number was often pantograph engraved into that extension. Sometimes stamped into the mag body on either side or even the spine of the mag.
Not a lot of hard and fast rules however!
I'll see if I can find that list.
(I've got that book, but I don't recall a ser# chart in it,unless it was an addendum page and I lost it. I'll check it anyway)
Added.
I found a listing of ser#'s from the old Walther board. I think it's been published in a book so I won't post it.
It says PPK mfg in 1940 as betw ser#'s 262,xxx and 307,2xx (all with a suffix K)
Any production year/ser# lists for the PPk and PP are based on old records outside of Factory production records, those no longer exist AFAIK. In other words they are an educated guess, but in most cases fairly accurate.
Hope this helps,